Configure the NDD Print Client Collector Pantum

To configure the NDD Print Client Collector Pantum, follow these steps:

Configure the NDD Print Client Collector Pantum

Below are the steps for configuring data collection on Pantum devices

1. Open NDD Print ECT (Embedded Configuration Tool)

2. Select the manufacturer Pantum

3. Select the Configure option

4. In the “Single Printer” section, enter the IP address or hostname of the device you want to configure

5. When you enable the NDD Print Client Collector option, the following options will be displayed:

6. After enabling this feature, fill in the following fields:

   1. Default Domain
      Enter the default domain to which jobs without a specified domain will be assigned.

   2. Sending Time
      Set the interval (in hours) at which data collected by the NDD Print Client Collector is sent to the server (NDD Print Host or Data Center, depending on the configuration).

   3. Server Address
      Enter the address (IP or hostname) of the destination server.

      • To send data to the Data Center, use, for example: wsembedded.nddprint.com

   4. Enterprise Key (see note below)
      Enter the key provided by the NDD sales department.

7. Select the types of jobs for which data will be collected:

   • Printings

   • Copies

   • Scans

8. Click “Send to printers” to apply the settings